Artificial Turf Installation Supplies Gopher Wire
Images shown are product or application examples. Final appearance may vary by lighting, infill, installation method, and surrounding landscape.
Artificial Turf Installation Supplies Gopher Wire Artificial Grass
Gopher wire is a heavy-duty, subterranean steel mesh barrier pinned directly onto raw soil before installing artificial turf. It acts as a mechanical shield against burrowing pests like gophers, moles, and voles. Without it, these rodents chew through weed fabrics, dig up sub-base rock, and push up dirt mounds that create unsightly, uneven ruts across synthetic lawns. Distributed primarily in 4’ × 100’ or 5’ × 100’ configurations. Manufactured from 20-gauge steel wire, providing the structural stiffness required to prevent rodents from chewing or tearing through the barrier. Sold in two specialized structural patterns depending on the severity of local pest infestations:1/2-Inch Welded Square Mesh: Offers maximum protection. Each intersection is automatically welded to trap smaller tunneling pests like voles. A highly pliable alternative optimized for large residential yards and sloped topography.Anti-Corrosion Longevity: Treated with a double-galvanization process (electroplated and hot-dipped zinc coating) to resist underground moisture and rot for 6 to 10 years.
Product Information
Review the product overview, technical specifications, recommended applications, installation notes, and warranty information.
Built For Natural Landscape Performance
Gopher wire is a heavy-duty, galvanized steel mesh barrier installed underneath the sub-base of artificial turf. Its primary purpose is to block burrowing pests like gophers and moles from digging through the soil, which prevents them from destroying your base compaction and creating uneven dips, sinkholes, or tears in your synthetic grass. Remove native soil and grass to a depth of 2 to 4 inches, creating a smooth, level subgrade before laying down any aggregate. Unroll the gopher wire directly on top of the excavated native dirt. Pull the mesh taut to eliminate any ripples, bows, or bubbling.Overlap the seams: When joining multiple rolls of wire, overlap the edges by at least 4 to 6 inches. This ensures burrowing pests cannot squeeze through gaps between the sheets. Secure the wire to the native soil using 6-inch turf staples or landscape pins. Space pins every 1 to 2 feet along the overlapping seams and every 3 feet around the outer perimeter.Crimp the seams: Use a wire crimping tool, hog rings, or galvanized tie wire to lock the overlapping seams tightly together for maximum security. Dump your crushed aggregate base (like decomposed granite or road base) directly on top of the secured wire. Spread the gravel carefully with a rake to avoid tearing the mesh, then moisten and compact it with a plate compactor before installing your turf.
- Natural multi-tone appearance
- Soft realistic blade structure
- Drainage-friendly construction
- Low-maintenance performance
- UV-stabilized color retention
Specifications are subject to change without notice.
Recommended Applications
Gopher wire (specifically ½-inch or ¾-inch galvanized hex mesh or hardware cloth) is a heavy-duty, underground protective barrier engineered explicitly to stop burrowing pests from destroying artificial turf installations. Laid directly over the native subgrade before pouring the crushed rock aggregate base, it physically blocks gophers, moles, and voles from digging upward, ensuring the synthetic lawn remains perfectly flat, stable, and untunneled. The primary application for gopher wire. It creates an impenetrable, continuous steel mesh shield across the entire excavation area, completely stopping subterranean rodents from burrowing to the surface. By blocking underground pests from digging tunnels directly beneath the artificial turf, the wire prevents the aggregate stone layer (crushed rock or decomposed granite) from washing down into empty gopher holes, which causes localized settling, deep ruts, and dangerous surface sinkholes. Installed vertically or at a sloped angle along property lines, beneath bender boards, or next to concrete mow strips to stop burrowing pests from migrating horizontally into the clean turf zone from a neighbor's infested yard.
- High-Impact, Elite Athletic Applications
- Suited for Professional Sports Stadiums
Installation & Care Notes
Installing Artificial Turf Gopher Wire (typically made from double-galvanized or stainless steel hexagon wire mesh) builds an impenetrable underground barrier that stops burrowing pests from destroying your synthetic lawn. Gophers and moles can chew through turf backing or dig tunnels under your base, creating dangerous sinkholes and lumpy surfaces. According to professional synthetic turf installation standards, gopher wire must be laid down directly on top of the excavated dirt subgrade before importing your stone base aggregate. This keeps the wire deep underground where it won't interfere with your leveling or turf securement. Remove all existing grass, weeds, roots, and organic surface topsoil. Dig out the entire installation footprint to a uniform depth of 2 to 3 inches below your target finished grade. Run a commercial vibratory plate compactor across the raw dirt until it reaches roughly 85% to 90% density to establish a firm, flat bottom floor.
- Professional base preparation recommended
- Use appropriate infill for the application
- Brush fibers periodically to maintain appearance
- Rinse as needed for dust, pets, or debris
- Confirm drainage needs before installation
Warranty & Availability
Landscape-grade Gopher Wire (Mesh) used as a sub-base barrier for artificial turf installations typically carries a 1-year limited manufacturer warranty against factory material defects, though premium double-galvanized or stainless steel variants often feature an extended 5-year to 10-year quality guarantee. Because it is buried underground beneath the aggregate base, a high-quality wire roll has an expected operational lifespan of 6 to 10 years before soil chemistry begins to corrode the metal grid. On hot-dipped galvanized rolls, the warranty protects against premature zinc flaking or bare wire spots, ensuring full rust-resistant coverage across the metal surface. Full replacement coverage if the factory welded or woven points (square or hexagonal joints) are broken or separate upon unrolling, compromising the barrier's structural strength. Guarantees that the metal wire meets its specified gauge thickness (typically 18 to 20 gauge) without thin spots that rodents could easily chew or tear through.
- Manufacturer-backed product support
- Nationwide shipping availability
- Sample requests available
- Project quote support available
- Installation support available in select markets
Where Artificial Turf Installation Supplies Gopher Wire Works Best
A simple application guide to help customers understand where this turf is most commonly used.
Residential Landscapes
Its Realistic Texture and Density make it Ideal for Decks, Rooftops, Patios, and Pet Play Areas.
Pet Areas
Durable Enough for Pets.
High-Impact Facilities
Ideal for high schools, universities, and municipal parks.
Slit-Film Fiber
The unique interlaced structural design holds down the infill material.
Is Artificial Turf Installation Supplies Gopher Wire Right For Your Project?
Artificial turf gopher wire is a heavy-duty, double-galvanized or stainless steel hexagonal mesh designed as an underground biological barrier against burrowing pests. Typically featuring a tight 1/2-inch grid size, it is rolled out directly over the raw, excavated soil before the aggregate stone base is dumped and compacted. Because artificial turf cannot heal itself once torn, installers specify gopher wire to protect the structural integrity of these specific projects. This is the most common use case. In regions heavily populated by gophers, moles, or voles, these pests will tunnel upward, digging out the dirt directly beneath the artificial turf. Gopher wire creates an impenetrable shield that forces pests to tunnel away from your yard. Without this wire, pest tunneling creates hollow underground voids. When humans or pets step on those spots, the base aggregate collapses into the tunnel, causing permanent, unsightly sinkholes and ruts in the synthetic lawn. Golf greens require a completely flat, precise surface for a true ball roll. A single gopher mound pushing upward beneath a putting green completely ruins the stimp speed and break of the course. Installers wrap the entire subgrade in wire to guarantee the green remains permanently level.
Natural Look
Multi-tone fibers help create a realistic landscape appearance.
Soft Feel
Comfortable surface feel for yards, families, and outdoor living spaces.
Low Maintenance
No mowing, watering, fertilizing, or ongoing natural grass upkeep.
Year-Round Use
Maintains a consistent green appearance across the seasons.
Ready To Upgrade Your Lawn Or Landscape?
Connect with our team to explore turf options, discuss your project goals, and find the right solution for your space.
Related Products & Accessories
Explore similar turf products, samples, and installation supplies for your project.